Term Paper Subheadings

When you are first faced with the task of writing a long essay or term paper it can be intimidating, but you make your job and the reader’s job much easier by following some basic rules of thumb. Of course, if your professors offer you any specific guidelines about writing be sure to follow those first. Otherwise, incorporate the advice that follows into your papers wherever appropriate.

Mechanics

Of course, papers should always be typed, double-spaced on 8-1/2 x 11 paper on one side of the page only, and letter-quality print or better is always expected. Often you are expected to supply a cover sheet giving the date, your name, the title of the paper, the class, and the professor’s name. Tables and figures should be numbered consecutively throughout the text, and if there are a good number of them, then separate lists of tables and figures at the beginning of the paper may be expected. Tables and figures should always have descriptive captions, and if they come directly from sources, the sources must be specifically credited in the captions with the same citation style that you use throughout the paper.

Title

A paper’s title should be succinct and definitive, individual and informational. Clearly, the title "An Overview of the Hydraulic Fracturing of Methane-Bearing Coal Formations" is more complete, satisfying, and informative than "Hydraulic Fracturing." The title is important because it announces the paper’s specific content and typically serves as a pathway to the paper’s thesis.

Introduction

Your introduction is your opportunity to be at your most individual. You should get your reader’s attention immediately by announcing the paper’s subject or by launching into a relevant scenario or narrative that informs or illustrates your overall argument. A paper illustrating the costly effects of poor mine design, for instance, might open with the scenario of how a poorly designed pillar at a salt mine in Louisiana once collapsed, fracturing the surface above and draining an entire lake into the mine. A paper on the supply and demand of nickel might begin by straightforwardly announcing that the paper will explain the uses of nickel, detail its market structure, and use data to forecast the future supply and demand of the metal.

In brief, a paper’s introduction should define and limit the paper’s scope and purpose, indicate some sense of organization, and, whenever possible, suggest an overall argument. Another important principle in technical writing is that the introduction should be problem-focused, giving the reader enough background so that the paper’s importance and relationship to key ideas are clear. A rule of thumb about the introduction’s length: about 5-10% of the entire paper.

As examples of how creative an introduction can be, here are the opening lines from a geography paper and a paper on optics, both of which use narrative technique to arouse our interest. Note how the first excerpt uses an "I" narrator comfortably while the second excerpt does not use "I" even though the writer is clearly reflective about the subject matter. The first excerpt is from a paper on the generic nature of America’s highway exit ramp services; the second is from a paper on shape constancy.

The observation struck me slowly, a growing sense of déjà vu. I was driving the endless miles of Interstate 70 crossing Kansas when I began to notice that the exits all looked the same. . . .

Our eyes often receive pictures of the world that are contrary to physical reality. A pencil in a glass of water miraculously bends; railroad tracks converge in the distance. . . .

Thesis Statement / Objective

Most papers have outright thesis statements or objectives. Normally you will not devote a separate section of the paper to this; in fact, often the thesis or objective is conveniently located either right at the beginning or right at the end of the Introduction. A good thesis statement fits only the paper in which it appears. Thesis statements usually forecast the paper’s content, present the paper’s fundamental hypothesis, or even suggest that the paper is an argument for a particular way of thinking about a topic. Avoid the purely mechanical act of writing statements like "The first topic covered in this paper is x. The second topic covered is y. The third topic is . . ." Instead, concretely announce the most important elements of your topic and suggest your fundamental approach—even point us toward the paper’s conclusion if you can.

Here are two carefully focused and thoughtfully worded thesis statements, both of which appeared at the ends of introductory paragraphs:

This paper reviews the problem of Pennsylvania’s dwindling landfill space, evaluates the success of recycling as a solution to this problem, and challenges the assumption that Pennsylvania will run out of landfill space by the year 2020.

As this paper will show, the fundamental problem behind the Arab-Israeli conflict is the lack of a workable solution to the third stage of partition, which greatly hinders the current negotiations for peace.

Body Paragraphs / Section Headings

Never simply label the middle bulk of the paper as "Body" and then lump a bunch of information into one big section. Instead, organize the body of your paper into sections by using an overarching principle that supports your thesis, even if that simply means presenting four different methods for solving some problem one method at a time. Normally you are allowed and encouraged to use section headings to help both yourself and the reader follow the flow of the paper. Always word your section headings clearly, and do not stray from the subject that you have identified within a section.

As examples, I offer two sets of section headings taken from essays. The first is from Dr. Craig Bohren’s "Understanding Colors in Nature" (1), which appeared in a 1990 edition of Earth & Mineral Sciences; the second is from a student’s paper on the supply and demand of asbestos.

Section Headings From "Understanding Colors In Nature"

  • Color By Scattering: The Role of Particle Size
  • Color By Scattering: The Positions of Source and Observer
  • The Blue Sky: The Role of Multiple Scattering
  • Color By Absorption in Multiple-Scattering Media
  • Color by Absorption: Microscopic Mechanisms are Sometimes Elusive

Section Headings From "Asbestos: Supply and Demand"

  • Industry Structure
  • The Mining and Properties of Asbestos
  • World Resources and Reserves
  • Byproducts and Co-products
  • Economic Factors and Supply and Demand Problems
  • Uses of and Substitutes for Asbestos
  • The Issue of Health on Supply and Demand

Just by considering the section headings in the above examples, we can begin to see the fundamental structures and directions of the essays, because both sets of headings break the paper topic into its natural parts and suggest some sort of a movement forward through a topic. Note how these headings—as all section headings should—tell us the story of the paper and are worded just as carefully as any title should be.

Most importantly, then, you must use your section headings in the same way that you use topic sentences or thesis statements: to control, limit, and organize your thinking for your reader’s sake.

Conclusion

Most papers use "Conclusion" as a heading for the final section of the text, although there are times when headings such as "Future Trends" will serve equally well for a paper’s closing section. When you are stuck for a conclusion, look back at your introduction; see if you can freshly reemphasize your objectives by outlining how they were met, or even revisit an opening scenario from the introduction in a new light to illustrate how the paper has brought about change. Your conclusion should not be a summary of the paper or a simple tacked-on ending, but a significant and logical realization of the paper’s goals.

Beware of the temptation to open your final paragraph with "In conclusion," or "In summary," and then summarize the paper. Instead, let your entire conclusion stand as a graceful termination of an argument. As you write your conclusion, concentrate on presenting the bottom line, and think of the word’s definition: a conclusion is an articulated conviction arrived at on the basis of the evidence you have presented.

What follows is an excerpt from a conclusion to a paper entitled "Exercise in the Prevention and Treatment of Osteoporosis in Women." Note how the conclusion reflects directly on the paper’s hypothesis and spells out the bottom line, gracefully bringing closure to the paper’s argument:

The majority of evidence presented in this paper supports the hypothesis that exercise positively affects bone mineral density in both premenopausal and postmenopausal women. Significantly, exercise has been shown to increase bone mineral density in premenopausal women even after the teenage years, and it helps preserve the bone mass achieved in the following decades. There is also evidence that exercise adds a modest, yet significant amount of bone mass to the postmenopausal skeleton. As these findings demonstrate, women of all ages can benefit by regular weight-bearing exercise, an increased intake of calcium-rich foods, and—for postmenopausal women—the maintenance of adequate estrogen levels. For all women, it is never too late to prevent osteoporosis or lessen its severity by making appropriate lifestyle choices.

References

Any sources cited must be correctly listed on a References page using the Author-Year or Number system (see Chapter 5 of this handbook).

If your instructor has specific requirements for the format of your research paper, check them before preparing your final draft. When you submit your paper, be sure to keep a secure copy.

The most common formatting is presented in the sections below:

Margins

Except for the running head (see below), leave margins of one inch at the top and bottom and on both sides of the text. If you plan to submit a printout on paper larger than 8½ by 11 inches, do not print the text in an area greater than 6½ by 9 inches.

Text Formatting

Always choose an easily readable typeface (e.g., Times New Roman) in which the regular type style contrasts clearly with the italic, and set it to a standard size (e.g., 12 points). Do not justify the lines of text at the right margin; turn off any automatic hyphenation feature in your writing program. Double-space the entire research paper, including quotations, notes, and the list of works cited. Indent the first line of a paragraph half an inch from the left margin. Indent set-off quotations half an inch as well (for examples, see 76–80 in the MLA Handbook). Leave one space after a period or other concluding punctuation mark, unless your instructor prefers two spaces.

Heading and Title

Beginning one inch from the top of the first page and flush with the left margin, type your name, your instructor’s name, the course number, and the date on separate lines, double-spacing the lines. On a new, double-spaced line, center the title (fig. 1). Do not italicize or underline your title, put it in quotation marks or boldface, or type it in all capital letters. Follow the rules for capitalization in the MLA Handbook (67–68), and italicize only the words that you would italicize in the text.

Do not use a period after your title or after any heading in the paper (e.g., Works Cited). Begin your text on a new, double-spaced line after the title, indenting the first line of the paragraph half an inch from the left margin.

A research paper does not normally need a title page, but if the paper is a group project, create a title page and list all the authors on it instead of in the header on page 1 of your essay. If your teacher requires a title page in lieu of or in addition to the header, format it according to the instructions you are given.

Running Head with Page Numbers

Number all pages consecutively throughout the research paper in the upper right-hand corner, half an inch from the top and flush with the right margin. Type your last name, followed by a space, before the page number (fig. 2). Do not use the abbreviation p. before the page number or add a period, a hyphen, or any other mark or symbol. Your writing program will probably allow you to create a running head of this kind that appears automatically on every page. Some teachers prefer that no running head appear on the first page. Follow your teacher’s preference.

Placement of the List of Works Cited

The list of works cited appears at the end of the paper, after any endnotes. Begin the list on a new page. The list contains the same running head as the main text. The page numbering in the running head continues uninterrupted throughout. For example, if the text of your research paper (including any endnotes) ends on page 10, the works-cited list begins on page 11. Center the title, Works Cited, an inch from the top of the page (fig. 3). (If the list contains only one entry, make the heading Work Cited.) Double-space between the title and the first entry. Begin each entry flush with the left margin; if an entry runs more than one line, indent the subsequent line or lines half an inch from the left margin. This format is sometimes called hanging indention, and you can set your writing program to create it automatically for a group of paragraphs. Hanging indention makes alphabetical lists easier to use. Double-space the entire list. Continue it on as many pages as necessary.

Tables and Illustrations

Place tables and illustrations as close as possible to the parts of the text to which they relate. A table is usually labeled Table, given an arabic numeral, and titled. Type both label and title flush left on separate lines above the table, and capitalize them as titles (do not use all capital letters). Give the source of the table and any notes immediately below the table in a caption. To avoid confusion between notes to the text and notes to the table, designate notes to the table with lowercase letters rather than with numerals. Double-space throughout; use dividing lines as needed (fig. 4).

Any other type of illustrative visual material—for example, a photograph, map, line drawing, graph, or chart—should be labeled Figure (usually abbreviated Fig.), assigned an arabic numeral, and given a caption: “Fig. 1. Mary Cassatt, Mother and Child, Wichita Art Museum.” A label and caption ordinarily appear directly below the illustration and have the same one-inch margins as the text of the paper (fig. 5). If the caption of a table or illustration provides complete information about the source and the source is not cited in the text, no entry for the source in the works-cited list is necessary.

Musical illustrations are labeled Example (usually abbreviated Ex.), assigned an arabic numeral, and given a caption: “Ex. 1. Pyotr Ilich Tchaikovsky, Symphony no. 6 in B, opus 74 (Pathétique), finale.” A label and caption ordinarily appear directly below the example and have the same one-inch margins as the text of the paper (fig. 6).

Paper and Printing

If you print your paper, use only white, 8½-by-11-inch paper of good quality. If you lack 8½-by-11-inch paper, choose the closest size available. Use a high-quality printer. Some instructors prefer papers printed on a single side because they’re easier to read, but others allow printing on both sides as a means of conserving paper; follow your instructor’s preference.

Corrections and Insertions on Printouts

Proofread and correct your research paper carefully before submitting it. If you are checking a printout and find a mistake, reopen the document, make the appropriate revisions, and reprint the corrected page or pages. Be sure to save the changed file. Spelling checkers and usage checkers are helpful when used with caution. They do not find all errors and sometimes label correct material as erroneous. If your instructor permits corrections on the printout, write them neatly and legibly in ink directly above the lines involved, using carets (⁁) to indicate where they go. Do not use the margins or write a change below the line it affects. If corrections on any page are numerous or substantial, revise your document and reprint the page.

Binding a Printed Paper

Pages of a printed research paper may get misplaced or lost if they are left unattached or merely folded down at a corner. Although a plastic folder or some other kind of binder may seem an attractive finishing touch, most instructors find such devices a nuisance in reading and commenting on students’ work. Many prefer that a paper be secured with a simple paper or binder clip, which can be easily removed and restored. Others prefer the use of staples.

Electronic Submission

There are at present no commonly accepted standards for the electronic submission of research papers. If you are asked to submit your paper electronically, obtain from your teacher guidelines for formatting, mode of submission (e.g., by e-mail, on a Web site), and so forth and follow them closely.

Designed to be printed out and used in the classroom. From the MLA Handbook, 8th ed., published by the Modern Language Association.

0 thoughts on “Term Paper Subheadings

Leave a Reply

Your email address will not be published. Required fields are marked *